Installation
A compact solution that adapts to your existing electrical system and grows with expansion modules as needed.
- 12/24 V DC supply
- Pluggable terminal connections
- I/O and AC expansion modules
- IP64 device enclosures
What changes for you?
Enjoy your boat. Let YatComm keep watch.
YatComm's real job is not simply to display data; it is to let you know before a problem grows.
Bilge alarm03:27
Water level rising — pump activated.
Be the first to know if water enters your boat
When the bilge water level rises, you receive an alert even when you are away. Check the situation on your phone and gain time to respond.
Low battery voltage17:40
Service battery voltage fell below the set threshold.
Notice a battery issue before you reach the boat
Monitor battery voltage remotely. Receive an alert when it falls below your chosen threshold and check the situation before arriving to find systems without power.
Fire alarm07:42
Smoke detected — check your boat.
Know when smoke is detected
When the smoke sensor on your boat raises an alarm, see the alert on your phone even when you are away. Early awareness gives you time to begin the necessary response.
Position alertnow
The boat moved 40 m from its anchor position.
Know immediately if it moves
GPS continuously monitors whether your boat remains in position. If a line parts, the anchor drags in a storm or unauthorised movement occurs, you can know within seconds wherever you are.
While away
- Receive an immediate notification if shore power is lost
- See a light left on and switch it off remotely
Before setting off
- Check battery status before starting the engine
- If you turn on the fridge and air conditioning before you arrive, cold drinks and a cool cabin will be waiting for you
While underway
- View temperature, RPM and engine data on one screen
- Switch navigation lights on or off with one touch
In an emergency
- Your phone alerts you at critical thresholds and identifies the source
- When the bilge water level rises, you can activate your emergency bilge pump
Features
One module, every system on your boat
Its compact size and broad capacity allow it to be added to the existing electrical system of boats large and small.
Inputs / Outputs
Bring important boat data together in one place, from tanks and batteries to sensors and lighting.
- 8 sensor inputs: tank level, temperature, pressure, etc.
- 16 digital inputs (12/24 V)
- 10 outputs: 5 current-controlled + 5 standard, 4 A per output
- 3 battery-voltage and 3 current measurements
Other Features
Monitor locally from the onboard screen and remotely over 4G, while working with other devices in the same system.
- 7″ touchscreen (up to 2 as needed) and mobile app
- 4G SIM and GPS connectivity
- Modbus and engine CAN bus connectivity
- AC voltage and current measurement from 3 phases or 3 independent sources (separate module)
REAL INTERFACES
On the screen onboard, in your pocket while away
The menus below are interactive. Select the icons and use the home control at the top left to return.
How It Works
A smart boat in three steps
1
The module is installed
Pluggable terminals support a clean and efficient installation without crimping connectors. It can be fitted to boats with an existing electrical system.
2
Your systems are connected
Tank, temperature and pressure sensors; battery banks, AC sources, Modbus devices and engine data over CAN bus.
3
You start monitoring
A 7″ touchscreen onboard and the mobile app in your pocket. Access over a 4G SIM wherever you are.
Contact
Let's talk about your boat
Together, we can determine the configuration that suits your boat.
Request information / a quote →- AddressKumbahçe Mah. Trandil Sk. No: 5/1 Bodrum / Muğla
- Phone+90 530 041 58 27
- Emailinfo@yatcomm.com